Top Printing Water Ink Flexo Printer Slotter Gluer Inline Automatic High Speed

KC-PG consists of automatic printer, automatic folder gluer and auto bundler. It features mobile units,roll to roll transfer or Vacuum transfer. Ink and energy saving function,touch screen and PLC setup.Automatic lubrication system keeps lubricant of all units at the same level.
Intervals adjusted by manual OR PLC and touch screen,Quick save-start order funciton design.
Suitable for corrugated cardboard.


Technologic parameter

1 Feeding unit

1,Machine clutch

1)Electric machine control clutch bell , moving last warning bell ring , ensuring the safety of operation personnel.

2)Drive shaft with a safe clutch to avoid misuse and damage to the machine (the machine is not fixed, the host can not start operation).

3)Pneumatic interlocking device .

4) Host motor start up protection device .

2, Adsorption leading edge Feeder system

1)lead edge feeder institution can greatly reduce clogging phenomenon in the process of cardboard paper.

2)Suction fan auxiliary feeder,make sure the winding paperboard feeding smoothly,The wind volume can be adjusted according to the size of the board.,The maximum guarantee of the vacuum adsorption of cardboard, so that more accurate to send paper.

3)front baffle and back baffle adopt manual adjust gap, feeder lift-right baffle adopt electric adjust gap.

4)feeder wheels adopt polyurethane material made,Large friction and long life.

5)it suitable for 3layers,5layers and 7layers corrugated cardboard, include E flute cardboard.

6)supply paperboard counter,set-up and Display production quantity.

3,dust-extraction unit

1)Equipped with dust removal mechanism ( remove dust brush ), effectively remove cardboard surface impurities , improve the quality of printing .

4,feeding roll

1)Seamless steel pipe , parcel wear-resisting rubber , correction and balance

2)Lower feed roller chrome plating.

3)feeder Paper roll gap dial manual adjustment, adjustment range 0-11mm.

5,Operation control switch (PLC computer control)

1) the control panel is equipped with 10 Inch Touch screen, can control the paper feeding, printing, slotting, die cutting, easy to operate.

6,Automatic zero return device

1)Paper feed, printing, slotting, cutting part of the electric automatic return to zero.

2) In general, the use of automatic paper box to zero device, try to print two can be adjusted to the correct position, reduce waste.

2 Printing unit

1,printing roller

1),Steel plate material, surface grinding, hard chromium plating.

2),Balance correction, smooth operation.

3),Fixed ratchet wheel shaft.

4),Full format plate ditch, suitable for 9mm hanging version.

5),Loading and unloading printing plate, pedal switch electric control positive and negative.

6),Printing roller clearance dial manual adjustment, adjust the range of 0-11mm.

2,printing pressure roller

1),Steel pipe surface grinding, hard chromium plating.

2),Balance correction, smooth operation.

3),printing pressure roller gap dial manual adjustment,adjustment range 0-12mm.

4),Feeder roller gap dial manual adjustment, adjustment range is 0-12mm.

3,Metal anilox roller

1),Steel pipe surface using advanced electroplating hard chromium technology, hard, smooth and wear-resistant.

2),Dot uniform, uniform on ink.

3),Prolong the service life of the plate and rubber roller.

4),anilox roller gap dial manual adjustment.

4,rubber roller.

1),Steel pipe surface coated with wear-resistant rubber.

2),High special grinding rubber roller, ink effect is good.

5,feeder paper up-down roller

1),up roller:Seamless steel pipe, with 2 paper feed wheel.

2),down roller:out diameter is 155mm Seamless steel pipe, surface grinding, hard chromium plating.

3),feeder roller gap dial manual adjustment,adjustment range is 0-12mm.

6, phase adjustment mechanism

1)planetary gear structure.

2)horizontal position, manually adjust the distance of a total of 10mm.

3)the printing plate roller adopts frequency converter to adjust the phase, return to zero and adjust the speed of the plate, adjust the version of high precision.

7,Ink circulation

1),Pneumatic diaphragm pump for ink stability, simple operation and maintenance.

2),Ink filter, filter impurities.

8,Printing phase fixing device

1),Pneumatic brake mechanism.

2),When the stage is separated or adjusted, the brake mechanism is restricted to rotate, and the fixed point of the original gear position is maintained.

3 Slotting unit

1, planetary wheel phase adjustment, positive and negative 360 degrees electric operation adjustment.

2, Carton length width height adjustment by computer control.

3, The front knife position to the automatic zero, zero after the linkage of the seat before the axial displacement.

4, When the Back knife Circumferential movement independently, to adjust the height of the carton, box high electric adjustment.

5, Linkage plates are made by Machining center

6, the linkage plate sliding has the diameter of 100mm linear slide way, less resistance, precise movement.

7, The upper and lower screw rod synchronous transmission adopts spiral gears, and the transmission is reliable and convenient to be installed, which can eliminate the gap and drive accurately.

8, The gap between the upper and lower cutter wheel sets of the slotting part can be adjusted by the cutting condition of the corner cutter group.

9, Three shaft type structure, line two, pre-loading, line pressure, ensure pressing effect.

10, elastic angle knife, five layer three layer need not adjust.

Dongguang Kecheng Machinery Manufacturing Co.,Ltd.(K.C.), established in 1999,   Cangzhou Yongjin Internation Trading Co.,Ltd. (YJ)  is  the export company for Kecheng Machine, which is committed to supplying the good quality carton machines to the clients all over the world.

K. C. is specialized in various carton printing machinery to meet the diversified demand from the clients. Here are Top Printing Printer Gluer Inline ,Top Printing Printer Slotter Die Cutter, Bottom Printing Printer Gluer Inline,Bottom Printing Printer Slotter Die Cutter,Folder Gluer, Stitching Machine for option,no matter roller transfer or vacuum transfer, rubber roller with ceramic anilox roller or doctor blade chamber with ceramic anilox roller, any kinds of machine will get the quality guarantee before delivered out of our company.

K.C uses the techlogic management to make all the procedure go well, so we can respond to clients needs rapid under the support of the experienced and professional team. ONE STOP solution service makes the clieints business easier.Thanks to the integraty of the service, manufacturing productivity and product quality, K.C. is growing by building the solid partner with clients and suppliers.In order to make sure the machine quality, the manufacturing standard must be complied with our company standard which beyond the common industrial standards. All the  parts purchased are from the ourstanding and experienced supplier.

The goal we pursue is to be the trusted quality supplier in the carton machiney field for years and believe the following competitive strengths enable us to capitalize on the growth opportunities :

• Good quality machines with high performance and stability;

• Rapid repond to clients needs with precision and affciency

• Making sure all the parts qualified with long life service and secure;

• Manufacturing the easy-operation machine with capacity and utilization; 

• Keeping the promises we make with honesty and sincerity.

K.C. will continue to focus on how to make the machine more technologic and efficient. We deeply undertand the world is changing so  fase, we also change our thought and improve our design and technology to make sure the the machine can increase the profit for the clients

Your success is our horner, expect to cooperate with you soon